Task: | Adjust |
---|---|
Structure: | Combination |
Mathematical Model: | Linear |
Signal: | 4-20ma HART RTD |
Function: | Automatic Control, Protection, Monitoring, Measurement |
Certification: | ISO: 9001, CE, CMMI5 |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
CPU | Main parameter of electrical source | ||||
I/O
|
14-CH 24VDC input 10-CH Relay output |
Supply Voltage |
220VAC @50Hz
|
||
Expansion capability | Up to 10 modules can be extended | Allowance range |
187~264VAC @50Hz
|
||
Storage capacity | Program area : 120KB | Maximum current |
120mA
|
||
N Area : 8KB M Area : 5KB |
Output Voltage |
24VDC
|
|||
Power loss holding area : 2KB | Output Current |
400mA
|
|||
Timer | Hardware timing : 1, 0.1ms ~ 500ms No limit on software timing (min. 1ms) |
Short-circuit protection |
800mA,24VDC output
|
||
Counter | 16bit | Communication interface | 1*RS232, | ||
Operating rate |
0.06μ s(Boolean operation instruction)
|
1*RS485 | |||
Interrupt input |
4
|
Communication protocol | MODBUS RTU protocol, | ||
Analog potentiometer |
2 ,0~255
|
Custom protocol | |||
Input Channal | Output Channal | ||||
Type of input | P/M-lesend | Type of output | Relay | ||
Input signal | Rated voltage 24VDC | Output signal | Rated voltage 24VDC or 24 ~ 230VAC |
||
0 ~ 30V DC | 5 ~30VDC or 5 ~ 250VDC |
||||
Input signal (ON) | 15~30VDC and > 3 mA |
Common terminal output current summation | < 5A | ||
Input signal (OFF) | 0~5VDC and < 1mA |
Output contact capacity | 2A, Impedance load | ||
Input delay | < 0.6ms (Rated input voltage) | Switch delay | < 10ms | ||
Isolation method | Optoelectronic isolation | The isolation voltage between the coil and the contact | 3000V AC, 1min, leak current 1mA | ||
Isolation of pressure | 1000VDC | Isolation voltage between contacts | 750V AC, 1min, leak current 1mA | ||
Mechanical life of relay | Without load, it can reach more than 10,000,000 times; Rated resistance 2A load, up to more than 100,000 times |
||||
Dimensions and Mounting | Work Environment | ||||
Dimensions |
120mm(L)×80mm(W)×63mm(H)
|
Operating temperature | 0 ~ +55ºC | ||
Weight |
380g
|
Storage temperature | -40 ~ +70ºC | ||
Way to install | 35mm DIN rail | Relative humnidity | 5% ~ 95% Noncondensing | ||
Panel mounting type |
Terminal | Terminal instructions | Terminal | Terminal instructions |
485+ | The positive pole of the RS485 interface |
1M
|
External input common terminal |
485-
|
The negative pole of the RS485 interface |
I0.0
|
Normal input terminal |
* | Undefined |
I0.1
|
Normal input terminal |
1L | Output common |
I0.2
|
Normal input terminal |
Q0.0
|
Normal Output terminal |
I0.3
|
Normal input terminal |
Q0.1
|
Normal Output terminal |
I0.4
|
Normal input terminal/External interrupt input |
Q0.2
|
Normal Output terminal |
I0.5
|
Normal input terminal/External interrupt input |
Q0.3
|
Normal Output terminal |
I0.6
|
Normal input terminal/External interrupt input |
Q0.4 | Normal Output terminal |
I0.7
|
Normal input terminal/External interrupt input |
2L
|
Output common |
2M
|
External input common terminal |
Q0.5
|
Normal Output terminal |
I1.0
|
Normal input terminal |
Q0.6
|
Normal Output terminal |
I1.1
|
Normal input terminal |
Q0.7
|
Normal Output terminal |
I1.2
|
Normal input terminal |
Q1.0
|
Normal Output terminal |
I1.3
|
Normal input terminal |
Q1.1
|
Normal Output terminal |
I1.4
|
Normal input terminal |
GND | RS232 ground terminal |
I1.5
|
Normal input terminal |
N
|
Zero line |
VO-
|
External power supply :positive |
L
|
Fire line |
VO+
|
External power supply :negative |
PIN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
Definition | -- |
RXD
|
TXD
|
-- |
GND
|
-- | user-defined | user-defined | -- |
Suppliers with verified business licenses