Task: | Adjust |
---|---|
Structure: | Combination |
Mathematical Model: | Linear |
Signal: | 4-20ma HART RTD |
Function: | Automatic Control, Protection, Monitoring, Measurement |
Certification: | ISO: 9001, CE, CMMI5 |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Name of Parameter | Parameter Index |
Remarks | |||
Central processing unit | High-performance embedded processor, 720MHz | ||||
Ethernet Interface | Two 100M redundant Ethernet interfaces Network protocol : SNet2.0/Modbus TCP |
||||
Power input | 12 ~ 30V DC | Support for redundant power supply inputs | |||
Power consumption
|
5W
|
||||
Operation temperature
|
-10 ~ 60ºC | ||||
Operation humidity
|
5 ~ 95% | ||||
Storage temperature
|
-20 ~ 85ºC | ||||
Storage humidity
|
5 ~ 95% | ||||
Mounting
|
35mm Din rail | ||||
Dimension
|
100(L) X 32(W) X 145(H) mm | ||||
DP communication slave station size | 64 | ||||
DP slave station address range | 0 ~ 125 | ||||
Profibus DP communication rate | 9.6kbps ~ 12Mbps | ||||
The total amount of data Input from all slave stations | 5712 bytes | ||||
The total amount of data Output from all slave stations | 5760 bytes |
1.Dual 24V DC power input terminal |
2.Grounding screw |
3.PWR = Power light ; RUN = Running indicator light ; FAIL = Fault indicating lamp |
4. SNet1/SNet2 interface ( 100Mbps Ethernet interface) SNet1 is connected to the SNetA network; SNet2 is connected to the SNetBnetwork; |
5. DP Master station diagnostic interface (USB) |
6. STA = DP Communication status ERR = Communication error |
7. DP Communication interface (DB9) |
8. 35mm rail |
Pin | Name | Describe | |
1 | NC | NC | |
2 | NC | NC | |
3 | RXD/TXD-P | The positive end of the isolated signal | |
4 | CNTR-P | Request signal (LVTTL) | |
5 | DGND | Isolated +5V, GND | |
6 | VP | Isolated + 5V, 90mA | |
7 | NC | NC | |
8 | RXD/TXD-N | The negative end of the isolated signal | |
9 | NC | NC |
Suppliers with verified business licenses