PLC with DI*14 DC24V, DO 10*relays, 1*RS232, 1*RS485 Photovoltaic Support Codesys

• Task: Adjust
• Structure: Combination
• Mathematical Model: Linear
• Signal: 4-20ma HART RTD
• Function: Automatic Control, Protection, Monitoring, Measurement
• Certification: ISO: 9001, CE, CMMI5
• Model NO.: SC1107
• Condition: New
• Customized: Customized
• Material: ABS
• Warranty: 1 year
• Transport Package: Carton
• Specification: 120mm(L)× 80mm(W)× 63mm(H)
• Trademark: Chitic
• Origin: China
• HS Code: 853710
• Production Capacity: 50000 Pieces/Year

Product Description

 

Technical Specifications

Support Codesys v3.5 SP13
 

CPU				Main parameter of electrical source
I/O		14-CH 24VDC input 10-CH Relay output		Supply Voltage	220VAC @50Hz
Expansion capability		Up to 10 modules can be extended		Allowance range	187~264VAC @50Hz
Storage capacity		Program area : 120KB		Maximum current	120mA
		N Area : 8KB  M Area : 5KB		Output Voltage	24VDC
		Power loss holding area : 2KB		Output  Current	400mA
Timer		Hardware timing : 1, 0.1ms ~ 500ms No limit on software timing (min. 1ms)		Short-circuit protection	800mA,24VDC output
Counter		16bit		Communication interface	1*RS232,
Operating rate		0.06μ s(Boolean operation instruction)			1*RS485
Interrupt input		4		Communication protocol	MODBUS RTU protocol,
Analog potentiometer		2 ,0~255			Custom protocol
Input Channal				Output Channal
Type of input		P/M-lesend		Type of output	Relay
Input signal		Rated voltage 24VDC		Output signal	Rated voltage 24VDC or 24 ~ 230VAC
		0 ~ 30V DC			5 ~30VDC or 5 ~ 250VDC
Input signal (ON)		15~30VDC and > 3 mA		Common terminal output current summation	< 5A
Input signal (OFF)		0~5VDC and < 1mA		Output contact capacity	2A, Impedance load
Input delay		< 0.6ms (Rated input voltage)		Switch delay	< 10ms
Isolation method		Optoelectronic isolation		The isolation voltage between the coil and the contact	3000V AC, 1min, leak current 1mA
Isolation of pressure		1000VDC		Isolation voltage between contacts	750V AC, 1min, leak current 1mA
				Mechanical life of relay	Without load, it can reach more than 10,000,000 times; Rated resistance 2A load, up to more than 100,000 times
Dimensions and Mounting				Work Environment
Dimensions		120mm(L)×80mm(W)×63mm(H)		Operating temperature	0 ~ +55ºC
Weight		380g		Storage temperature	-40 ~ +70ºC
Way to install		35mm DIN rail		Relative humnidity	5% ~ 95% Noncondensing
		Panel mounting type

Main interface and terminal definitions



1.Indicator lights: RUN, COM and ERR are used to display module operation, communication and fault conditions respectively, I and Q are used to show the module operation, communication and fault conditions respectively. Indicates the input and output status of each channel.
2.Module output terminal: It is composed of power supply driver 1L, 2L and output point Q. "*" indicates that there is no actual output on this channel. Physical connection, with relay output at the terminal.
3. Module input terminals: consisting of common terminal 1M, 2M and input point I. Source/drain type connection can be used.
4. RS232 communication interface: This interface can be used for program download, communication with touch screen and host computer. MODBUS RTU/free protocol.
5. RS485 communication interface: This interface can be used to communicate with touch screen, upper computer, third-party instruments, etc., and supports MODBUS RTU/free protocol.
6. Power supply of the module: L, N, GND AC220V power supply's fire wire, zero wire and protective ground terminal.
(vii) 24VDC power supply external to the module: VO+ and VO- are 24VDC positive and negative terminal blocks respectively.

Note: PCS1200 programmable logic controller terminals are all pluggable.


Terminal tag definition specification
 

Terminal	Terminal instructions	Terminal	Terminal instructions
485+	The positive pole of the  RS485 interface	1M	External input common terminal
485-	The negative pole of the RS485 interface	I0.0	Normal input terminal
*	Undefined	I0.1	Normal input terminal
1L	Output common	I0.2	Normal input terminal
Q0.0	Normal Output terminal	I0.3	Normal input terminal
Q0.1	Normal Output terminal	I0.4	Normal input terminal/External interrupt input
Q0.2	Normal Output terminal	I0.5	Normal input terminal/External interrupt input
Q0.3	Normal Output terminal	I0.6	Normal input terminal/External interrupt input
Q0.4	Normal Output terminal	I0.7	Normal input terminal/External interrupt input
2L	Output common	2M	External input common terminal
Q0.5	Normal Output terminal	I1.0	Normal input terminal
Q0.6	Normal Output terminal	I1.1	Normal input terminal
Q0.7	Normal Output terminal	I1.2	Normal input terminal
Q1.0	Normal Output terminal	I1.3	Normal input terminal
Q1.1	Normal Output terminal	I1.4	Normal input terminal
GND	RS232 ground terminal	I1.5	Normal input terminal
N	Zero line	VO-	External power supply :positive
L	Fire line	VO+	External power supply :negative

Input channel connection mode





Output channel connection mode



RS232 communication port definition
 

PIN	1	2	3	4	5	6	7	8	9
Definition	--	RXD	TXD	--	GND	--	user-defined	user-defined	--

About CHINT

Founded in 1984, the Chint Group provides safe, reliable and stable industrial electrical equipment and solutions for energy efficient management systems. With 30 years of development it has grown to be Asia' s largest low*voltage electrical product supplier and is the leading brand of the whole industry chain in industrial electric in Asia. With three R&D centers located in Europe, North America and China, there are also branches in over 20 countries and more than 30.000 employees in the world. CHINT provides reliable products, system solutions and services to more than 100 countries worldwide.






•    3 Global Research Centers: Europe, North America, Asia Pacific
•    6 International Marketing & Sales Area: Asia Pacific, Middle East and Africa, Europe, Latin America, North America, China
•    9 Manufacturing Bases: China (Wenzhou, Shanghai, Hangzhou, Jiaxing, Xianyang, Jiuquan), Thailand, Egypt, Germany
•    22 Logistics Centers 14 International Subsidiaries 17 Marketing Offices in China 2300 Sales Companies


About Chitic

Chrtic Control Engineering Co.. Ltd. is a subsidiary company of Chint, and a leading provider of automation & control technologies and applications in China that helps the industry customers to improve operating safety, reliability and efficiency. Chitic has series of products including PCS1800 DCS, TDCS9200 DCS and CTS700 DCS, information platform for water company, control system for high speed rapier loom, drive system of switched reluctance motor, solar energy monitoring system, computing cloud center for new energy; etc. Chitic control system won 2006 National Science and Technology Progress Awards of China, CTS700 DCS won the award of 2010 Innovative Product of China. Chitic headquarter is located at the beautiful city of Hangzhou, two hours drive from Shanghai. Chitic has its own science & technology park, Chitic Park, which covers about six thousand square meters.

Our Business Sector





Typical Reference