CHINT AI,Isolated Barrier(2 channels)
Analogue Input Isolated Barrier,It can provide the transmitter located in the hazardous area a separate power, transfer current signal generated by transmitter from a hazardous area to a safe area, can also transfer current signal from a safe area to a hazardous area and drive equipments like actuator in field. It allows bi-directional transmission of HART communication signals, The product requires independent power supply, power supply, input and output three isolation.
Production parameters
| MODEL NO |
CB4036-EX |
| Number of channel |
2 inputs/2 outputs |
| Supply voltage(Ue) |
20~35V DC |
| Input signal |
0~20mA;4~20mA;HART |
| Output signal |
0~20mA;4~20mA;HART;0~5V;1~5V |
| Field apparatus |
2-wire HART transmitter,3-wire transmitter, current source |
Technical data
1. General
| Number of channels |
2inputs/2outputs |
| Dielectric strength |
Between non-intrinsically safe part and intrinsically safe part≥2500VAC,Between power supply part and non-intrinsically safe part≥500VAC |
| Output accuracy(20°C) |
0.1%F.S. |
| Temperature drift |
0.005%F.S./ºC |
| Response time |
Reach 90% of final value in 2ms |
| Insulation resistance |
Between non-intrinsically safe part and intrinsically safe part≥100MΩ,Between power supply part and non-intrinsically safe part≥100MΩ |
| Electromagnetic compatibility |
According to IEC 61326-1(GB/T 18268) |
| EX marking |
[Ex ia Ga]IIC [Ex iaD] |
| Weight |
Approx 150g |
| Field apparatus |
2-wire HART Transmitter,3-wire Transmitter,Current Source |
| Suitable location |
zone 0;zone 1;zone 2;IIA;IIB;IIC;T4~T6 |
2. Input Data
| Input signal |
0~20mA;4~20mA;HART |
| Open circuit voltage |
≤28V |
| Distribution voltage |
Voltage: ≥15.5V at 20mA |
| Normal working current |
≤25mA |
3. Output Data
| Output signal |
0~20mA;4~20mA;HART;0~5V;1~5V |
| Current output load resistance |
RL≤300Ω |
| Voltage output load resistance |
RL≥330kΩ |
4. Power Supply
| Supply voltage(Ue) |
20~35V DC |
| Power protection |
Reverse protection of power supply |
| Current consumption |
≤65mA (at 24Vdc supply,20mA output) |
| Power supply mode |
Independent power supply |
| Power connecting mode |
Terminal |
5. Housing
| Material |
PA |
| Degree of protection |
IP20 |
| Flammability rating |
UL94/V0 |
| Colour |
green |
6. Product approvals
7. Standard/Specification
| NEPSI |
[Ex ia Ga] IIC Comply with standard: GB 3836.1,GB 3836.4,GB 3836.20 [Ex iaD] Comply with standard: GB 12476.1,GB 12476.4 |
8. Safe data
| Max. r.m.s. a.c. or d.c. voltage Um |
250V |
| Max.output voltage Uo |
28V(7,8,9) |
| Max.output current Io |
93mA(7,8,9) |
| Max.output power Po |
651mW(7,8,9) |
| IIC Max. external inductance Lo |
4.2mH(7,8,9) |
| IIC Max. external capacitance Co |
0.083μF(7,8,9) |
| IIB Max. external inductance Lo |
12.6mH(7,8,9) |
| IIB Max. external capacitance Co |
0.65μF (7,8,9) |
| IIA Max. external inductance Lo |
33.6mH(7,8,9) |
| IIA Max. external capacitance Co |
2.15μF(7,8,9) |
9. EMC DATA
| Output signal |
0~20mA;4~20mA;HART;0~5V;1~5V |
| Current output load resistance |
RL≤300Ω |
| Voltage output load resistance |
RL≥330kΩ |
10. Data communication
11. Operating Conditions
| Ambient temperature |
-20ºC~+60ºC |
| Storage temperature |
-40ºC~+80ºC |
| Relative humidity |
10%~90% |
| Environmental requirements |
The air should not contain any medium corrupting the coat of chrome,nickel and silver.Moreover,violent quiver and impact or any cause of electromagnetic induction (such as big current or spark,etc.)must be avoided when using |
12. Connection Data
| Conductor cross section solid range |
0.5~2.5mm² |
| Conductor cross section flexible range |
0.5~2.5mm² |
| Conductor cross section AWG min. |
12 |
| Conductor cross section AWG max. |
24 |
| Stripping length |
8mm |
| Screw thread |
M3 |
| Connection method |
Screw connection |
| Tightening torque min. |
0.5 Nm |
| Tightening torque max. |
0.6 Nm |
13. Installation
14. Notes
| Utilization restriction |
1. It is not allowed to use HHC (HART hand-held communicator) in hazardous area and safe area at the same time.2. HHC (HART hand-held communicator) used in hazardous area must have an EX certification. |
Audited Supplier 
){kind=link}
){kind=link}